Pop-up sorter The pop-up system is proper when a wide range of products has to be sort into multiple outlets. It is made up by a belt conveyor where groups of diverting wheels rows are installed. When the load reach the pre-selected sortation position, pop-up lifts and turns to divert it. Pop-up can sort either to one-side or two-sides, and include one or more rows, depending on the products dimension range. The system is suitable for throughputs up to 4,000 units per hour and sorts cases, totes or products of several weights -up to 50 Kg.- and shapes with care and accuracy. View video of Clasification pop-up 1 Diverter arm The diverter arm is applied for light load's sortation and loads guiding. It is made up by a vertical belt conveyor which chainge direction when transfers. It is indicated when the load has to be diverted from the main line to a continuous line installed at 30 o 45º. Also indicated in pre-sorting or sorting lines. Up to 4,000 units per hour. See photo Pneumatic pusher Pushers are designed to make a 90º transfers by means of an controlled push of the load. The capacity of this pneumatic system reach the 1,200 units per hour. See photo |
Multiple Pop-up sorter The multiple pop-up diverter is the best for two-side sortation, when a great range of product dimension has to be handle in high throughput. It is installed as loads directioner equipment, to move loads to a target destination. It is made up for 4 to 6 double rows of driven wheels and intermediate support rollers. The rows have a sequential actioning. When the load reachs the previous position each double rows turn and slightly lift, leading the load accurately to be diverted or positioned in a target side of the conveyor. Indicated for throughput up to 6,000 u/h, this equipment sorts loads, parcels or totes of varied weights - up to 50 Kg.- and sizes. View video of Detail of pop-up 2 Belts transfer Transfer belts conveyors are applied in 90º diverts. They are used either to infeed / outfeed loads in a conveyor line, or to link parallel conveyors. Thelow noise and accuracy of the system make this equipment, excellent for medium cadence sortation. It is designed to handle containers or boxes of varied shapes and weights up to 50 Kg , at cadences up to 1,600 units per hour. High performance and low maitenance requirements are the bases of this renovated equipment. |
Belt Verti-sorter The vertical sorting system Verti-Sorter is suitable for diverting items to two destinations, or merging two lines into one. The tilting system integrated in the belt is driven by means of a geared motor. The system capacity is variable and can be adapted to the installation requirements, reaching a vertical sortation up to 3,000 units per hour. See photo Chain transfer Chain transfers are applied to divert loads at 90º. They are used either to infeed/outfeed loads in a conveyor line, or to link parallel conveyors lines. The low noise and accuracy of the system make this equipment excellent at medium cadence. The chain transfer supports and transports the loads, without brushing against the conveyor with the maximum care. They are suitable for various types of loads, totes and boxes, and allow to sort up to 50 Kg per load and throughputs cadencies up to 1,200 units per hour, with frequent starts and stops. See photo
|
